Basis Hy-Per Shield Technology Power Cables

 

The Basis Power Cable sets new standards in silence and purity of AC power through its pure conductors, limited bandwidth, and most importantly, exotic-material, double-shielded Hy-Per Shield Technology design.  

Perfectionist Power cables’ job is obvious: they must deliver 50 or 60 cycle sine waves while introducing no power factor (time lag between voltage and current peak values). The Basis Power Cable performs this function flawlessly, being optimized for transmission of power in the 50-60 hertz range.  However, more important than the transmission of power is the requirement for the power cord to be clean; to not “pollute” the component area with high frequency powerline noise, RFI, and low frequency electromagnetic radiation.  It is critical that power cables not act as “radiating antennae” for the powerful, fluctuating magnetic wave which is a result of the AC waveform itself.  (Please see physics texts for the explanation of the intrinsic link between electricity and magnetism.  A full discussion is beyond the scope of this paper.)  Always in close proximity to power cords are small signal cables.  Many power cords are shielded and offer some degree of protection to nearby signal cables from RFI.  However, low frequency shielding of the power cord to contain the strong 50 or 60 hertz pulsating magnetic fields requires totally different materials and has not been effectively addressed in the audio field.  Basis has solved this problem with our Hy-Per Shield system, utilizing exotic materials to eliminate the ability of the power cords to radiate this energy. 

The result is that the power cords are prevented from acting as radiating antennae for all types of energy, meaning that your phono cartridge, phono stage, and small signal cables will be receiving less noise from the environment.  You will hear lower system “hum”, greater overall system silence, increased low level detail, lower “grain”, and increased dynamics.   Preamp and amplifier distortion will be lower and higher power will be available to your speakers from your amplifier when it is freed from amplifying this non-musical information.

All systems are quieter and sound more powerful and effortless when changing over entirely to Basis “Hy-Per Shield Technology” Power Cables.  In cases where the change will not be made all at once the highest priority locations are the turntable and phono stage cables.  The next most important location would be the preamplifier.  A general guideline is to prioritize the locations where the power cord must be near small signal sources and low level cables.    

The performance of the Basis Power Cables is due to the particular electrical design of the cable as well as unique materials and characteristics, including

1.    Conductor material: The highest purity proprietary copper alloy is used throughout.

The benefits: High current capability, total predictability of electrical characteristics to guarantee the most effective power delivery in the 50-60 hertz range without introduction of a “power factor”.     

2.    Dielectric material: Stable, pure dielectric for primary and secondary insulation.

The benefits: Absolute predictability of unique, balanced electrical characteristics.

3.    Shielding:  Hy-Per shield exotic metal double shielding.

The benefits:  The quietest cables in the audio industry.  Low transmitted and emitted electromagnetic and RF fields result in more effortless musical presentation, lower grain, greater low level detail, finer image precision, greater perceived power, and lower audible hum.